Digital Photo Fluorometer
Digital Photo Fluorometer
Digital Photo Fluorometer
Introduction
Digital Photo Fluorometer Model 9015-G is designed for precise analysis of fluorophores such as vitamins, quinine, steroids, fluorescein, metal complexes, etc. The Fluorescence is caused by the absorption of radiant energy and the re-emission of some of its energy in the form of light. In fluorescence, the excited molecule returns to the ground state immediately after excitation, when the fluorescent molecule is excited at the fixed wavelength (primary filter). The amount of light emitted is measured at the particular wavelength (secondary filter). Fluorometer method for the determination of fluorophores is more sensitive than the Colorimetric method.
The Primary Filters – Corning 5840 & Corning 5113 and secondary filters – Corning 4308, Corning 3486 and Corning 3385 mounted on holders are supplied with the instrument The fluorescence is collected at 90 degree angle to minimize the interference of excitation source to fall on the sample solution only during a measurement.
Salient Features
· 3 Digit LED display
· Covers entire visible range
· Determines the concentration of Fluorophores & Quinine
Technical Specifications
| ||
Fluoro Sensitivity
| :
| Full scale deflection obtained with 1 ppm quinine sulphate in 001 N Sulphuric acid (primary wavelength 360 nm)
|
Display
| :
| 3 Digit Bright Red Seven Segment LED Display
|
Excitation Source
| :
| 12V,50W Tungsten Halogen Lamp
|
Sensitivity Range
| :
| Adjustable in 4 ranges
|
Primary Filters
| :
| Corning 5840 (360 nm) and Corning 5113 (405 nm) mounted on holders
|
Secondary Filters
| :
| Corning 4308 (465 nm), Corning 3486 (650 nm), Corning 3385 (560 nm above) mounted on holders
|
Detector
| :
| Highly sensitive wide range photodiode/cell
|
Sample Test Tube
| :
| 15 mm(D) × 80 MM (H)
|
Minimum Sample
| :
| 4 m
|
Power
| :
| 230 V ± 10%,50 Hz. AC
|
Weight
| :
| 5 Kg. (Approx.)
|
Standard Accessories
| :
| Primary and Secondary Filters: A set of 5,
Test Tube: A set of 5
|